Steam locos
Mantua Mallet 2-6-6-2 spares
My father in law just bought one of these second hand but the flexible drive to the articulated truck has snapped
does anyone know where I can get a replacement?
thanks in advance
Dan
![MikeM's picture MikeM's picture](https://model-railroad-hobbyist.com/sites/model-railroad-hobbyist.com/files/pictures/picture-1322.jpg)
Besides eBay and Brasstrains.com, where do folks go to search for HO brass steam locos?
I monitor both of these on a regular basis and just wonder if anyone else has a good place to search. I'm more than a bit nervous about eBay given the price of some offerings there and the rather sparse descriptions often given items. I'm looking for moderate size rodded locomotives but particularly for logging (either geared or rodded) in standard gauge HO. Many places I used to look appear to be out of business or at best very inactive.
NEW Updated Bachmann On30 Mogul with Factory Sound Video
Have a video of the updated On30 Bachmann Mogul.
Am sure the question is "Is the updated version worth the price?"
Having done the conversion on an analog, price-wise:
______________________________________________
All prices with shipping
Street Price of Update with sound $298.85
Street price Analog Mogul $100.90
Connectors $6
Phosphor bronze sheet $6
Speakers $12
![ewarhol's picture ewarhol's picture](https://model-railroad-hobbyist.com/sites/model-railroad-hobbyist.com/files/pictures/picture-12623.jpg)
HO scale Steam Engine Connecting Rod Repair
Hello-
Have an HO scale Proto 2000 Heritage 2-8-8-2 that has a connecting rod that fell apart. Can't find the little rivet that held it together. Any suggestions on how to repair the connecting rod?
Eric
![trains577's picture trains577's picture](https://model-railroad-hobbyist.com/sites/model-railroad-hobbyist.com/files/pictures/picture-3488.jpg)
844 accident
I was wondering what is now going to happen to steam trips after the accident that killed a woman standing to close to the tracks. Will this be the end of all trains rides because of insurance cost getting out of reach, like it is already, or will this be a wakeup call to make people stand away from the track, or now be run off because the railroads won't want anyone near the rails. Maybe fences will be put up to keep people away from the tracks, or police running you off or in worst case taking you to jail.
![joef's picture joef's picture](https://model-railroad-hobbyist.com/sites/model-railroad-hobbyist.com/files/pictures/picture-3.jpg)
Okay steam modelers -- what would your ProtoThrottle look like?
Okay, now that the diesel ProtoThrottle is out, let's have a hypothetical discussion here.
What would a steam-based ProtoThrottle look like, and how would it function?
This involves TWO things as I see it:
1. What decoder settings would be needed to simulate momentum and things like the Johnson bar?
2. What might the physical configuration of a throttle that simulates a boiler backhead look like? Could it be handheld?
![kleaverjr's picture kleaverjr's picture](https://model-railroad-hobbyist.com/sites/model-railroad-hobbyist.com/files/pictures/picture-4793.png)
What are your "Top Ten" Colors for Model Railroad Paints
I'm looking for opinions on this question:
![tbdanny's picture tbdanny's picture](https://model-railroad-hobbyist.com/sites/model-railroad-hobbyist.com/files/pictures/picture-12440.png)
A New No. 8 Engine for the BVLC (On30 scatchbuild)
I'm afraid this post must start on a bit of a sad note. A couple of years ago, I used a 3D printed cab and scratchbuilt water tank to convert a Bachmann On30 2-6-0 to a 2-6-2 saddle tank engine. Although it looked good, it didn't run as well as I would have liked. A few weeks ago, I took it apart to try to tune it up, and add a currentkeeper to improve power pickup. Unfortunately during this, it took an accidental express trip to concrete junction. Most of the damage was to the body, and I did try to repair it. Unfortunately, my efforts were not s
![s_brown's picture s_brown's picture](https://model-railroad-hobbyist.com/sites/model-railroad-hobbyist.com/files/pictures/picture-8470.jpg)
Proto Heritage 0-6-0 help
Hi All, have just purchased a Proto Heritage USRA 0-6-0 which has a missing "bolt" for one of the side rods. I'll Post Photos below. Does anyone know where I might source a replacement or indeed what the size/thread is for these. I tried HO Seeker for an exploded diagram as I haven't yet physically got the loco to see if leaflet(s) are in box.
TIA
Simon
Melbourne Australia
>> Posts index
![Steam locos Syndicate content](/misc/feed.png)
Navigation
Journals/Blogs
Recent Blog posts: